Thinking of buying a spa, the first things is to know where it is manufactured and assembled (hull, jets, accessories, electronics etc. ...),
the second is to ensure that the spa is tested "in water" before delivery.
Before purchasing decision, made you certify the country of manufacture of the hull, because if you buy a spa in "source" of the United States, this does not mean that the hull and accessories are manufactured in the country mentioned. Often, the marketing spin you mask the true origin of manufacture which happens to be China.
Our technicians will inform you about the benefits and differences in quality a spa "made in France".
For your peace of mind, these details should be determined before purchase.
They will reassure you notement quality monitoring technical and after-sales service.
The doors of our factory are open, so feel free to visit our facilities to discover all the manufacturing steps of a spa.
Our factory in Saint Gilles (France 30)
Click here to view on GOOGLE MAPS
the second is to ensure that the spa is tested "in water" before delivery.
Before purchasing decision, made you certify the country of manufacture of the hull, because if you buy a spa in "source" of the United States, this does not mean that the hull and accessories are manufactured in the country mentioned. Often, the marketing spin you mask the true origin of manufacture which happens to be China.
Our technicians will inform you about the benefits and differences in quality a spa "made in France".
For your peace of mind, these details should be determined before purchase.
They will reassure you notement quality monitoring technical and after-sales service.
The doors of our factory are open, so feel free to visit our facilities to discover all the manufacturing steps of a spa.
Our factory in Saint Gilles (France 30)
Click here to view on GOOGLE MAPS
PRINCIPLE :
The acrylic plate is brought to the rubbery state under the influence of heat, it becomes easy to give it a shape. Once the temperature dropped, it returns to the solid state after taking the shape of the mold.
Thermoforming takes place in the following phases:
1. heating of the material
2. withdrawal of heated and elevation of the mold
3. shaping of the material on the mold
4. cooling (the room remains on the mold)
5. release and evacuation of the room.
The stage of stratification (projection of polyester) is a step in the manufacture of the spa very important for the sustainability of the unit.
The screening must be performed in a stable and low humidity to avoid trapping moisture between the acrylic and polyester.
If moisture is trapped in the projection, this water will eventually be transformed into hydrogen and promote the phenomenon of blistering in the spa (a phenomenon often mistakenly called osmosis, which were found on the Asian manufactured home spa in a very high ambient humidity).
The choice of resin used for projection is also capital. All resins are not suitable for use on acrylic. The resin is most suitable latching methacrylate resin.
When the resin is sprayed, it causes a reaction of acrylic and 2 are literally welded component. Then there is no risk of "delamination".
Universalwater works in two stages which we call skin.
The first skin (first screening) is thin (2-3 mm) is used to seal spas.
Of its projection is boiling to remove the air between the two components.
The 2nd skin (the second projection) is thicker (4-5 mm) it is the final thickness of the spa and thus its rigidity, the skin is also ébullée immediately.
Our company fully mastering the manufacturing stage with its experience in the polyester as a manufacturer of pool.
We can therefore guarantee our shells for a period of 10 years.
The screening must be performed in a stable and low humidity to avoid trapping moisture between the acrylic and polyester.
If moisture is trapped in the projection, this water will eventually be transformed into hydrogen and promote the phenomenon of blistering in the spa (a phenomenon often mistakenly called osmosis, which were found on the Asian manufactured home spa in a very high ambient humidity).
The choice of resin used for projection is also capital. All resins are not suitable for use on acrylic. The resin is most suitable latching methacrylate resin.
When the resin is sprayed, it causes a reaction of acrylic and 2 are literally welded component. Then there is no risk of "delamination".
Universalwater works in two stages which we call skin.
The first skin (first screening) is thin (2-3 mm) is used to seal spas.
Of its projection is boiling to remove the air between the two components.
The 2nd skin (the second projection) is thicker (4-5 mm) it is the final thickness of the spa and thus its rigidity, the skin is also ébullée immediately.
Our company fully mastering the manufacturing stage with its experience in the polyester as a manufacturer of pool.
We can therefore guarantee our shells for a period of 10 years.
- in press ...
- in press ...
- in press ...
- in press ...
ANGEL'S SPA 